The milling machine HS-F1000 combines innovative technology and full flexibility with compact and robust design. Key features are shortest preparation time, easy automation and top-level quality.
The operator, the robot or a belt transport system drops the sample at the transfer position of the HS-F1000. As the HS-F1000 mills the bottom sample surface, the sample is already in a defined zero plane position. Time consuming measurement of sample height is therefore not needed. Subsequently, the mobile support -coming from above- clamps the sample and transfers it to the milling spindle where it is milled from below. This sequence -speed-optimized in all sub-steps- is saving valuable seconds which is especially important for time-sensitive production samples. Of course, the HS-F1000 comes with sensor-based safety measures to prevent crashing at the transfer position or milling of inappropriate samples.
The design of the HS-F1000 guarantees high flexibility to meet the particular needs of the customer. During manual operation, the operator inserts samples via the front door. The default input position is on the left machine side but might be easily changed to the right side. In automatic mode, samples can be inserted either via the lateral or the back-loading openings using a robot, conveyor belt or magazine. The different access possibilities open up many options to integrate the HS-F1000 in any kind of automation setup. Even individual configurations and layouts can be realized without constructive changes of the machine. This gives you both maximum planning freedom and significant time and cost savings for your project.
- Dimensions L x W x H: 1300 x 1000 x 1900 mm
- Weight: 2200 kg
- Cutting depth: Max. 2 mm programmable in steps of 0.05 mm
- Processing cycle duration: Depending upon the program approximate 20 to 40 sec.